Multifunctional Faucet Extender Attachment — Rotating Bubbler & Spray Nozzle

Your Kitchen Tap Does One Thing. This Attachment Gives It Three.

A standard kitchen tap delivers water in one fixed mode from one fixed position. That works for filling a pot, but it is less suited to rinsing vegetables across a wide area, directing a flat fan of water at a surface to clean it, or filling a glass with a focused stream without splashing. This Multifunctional Faucet Extender Attachment screws onto your existing tap and replaces the standard flow with three selectable spray modes and a rotating swivel connector that angles the output where you need it. No plumbing required — it fits standard tap outlets and installs in minutes.

What’s in the Box

• 1 × Faucet extender connector

Verified Specifications and What They Do

• Three spray modes via selector button — As shown in the product image, a button on the top of the unit switches between modes. The product specifies: a waterfall/rain shower mode (multiple jets across the face of the unit producing a wide rain-style flow), a fan/scraper spray mode (a flat sheet of water directed outward — shown in the image being used to clean a surface), and a focused stream mode (a single concentrated flow for filling glasses or bottles, as shown in the third panel).
• Rotating swivel connector — As visible in the product image, a double-jointed swivel ball connector sits between the tap thread and the spray head. This allows the spray head to be angled and rotated to direct water where it is needed rather than straight down in a fixed position.
• Rectangular spray head with multiple outlets — The spray head is a rectangular chrome unit with a grid of small holes across the face for the waterfall mode, plus additional outlets for the other modes. The electroplated chrome finish matches most modern kitchen and bathroom tap styles.
• Material: ABS with electroplated surface treatment — The body is ABS plastic with an electroplated chrome-finish surface. The electroplating provides the chrome appearance and adds surface durability.
• Operating pressure: 0.6 MPa nominal — Rated for standard household water pressure up to 0.6 MPa.
• Operating temperature: up to 70°C — Compatible with both cold and hot water supplies up to 70°C.
• Universal connector design — Specified as a universal fitting designed to connect to standard tap outlets. Compatible with kitchen, bathroom, bar, and laundry sink taps with a standard threaded outlet.
• Available in Black and Silver — Select your preferred finish from the variant options above.

Who This Attachment Is Best Suited For

• Home cooks who rinse produce regularly — The waterfall mode distributes water across a wider area than a standard tap outlet, making it more effective for rinsing fruits, vegetables, or herbs in a colander or directly under the tap.
• Anyone who finds their tap splashes too much — A standard high-pressure tap outlet directed into the sink can cause significant splashing. The waterfall and bubbler modes aerate and spread the flow, reducing the force and splash of the water hitting the sink or dishes.
• Kitchen and bathroom tap upgrades without replacing the tap — Replacing a full kitchen tap is a plumbing job. Fitting this extender attachment updates the function of an existing tap in minutes without tools or professional installation.
• Filling narrow-necked bottles or containers — The focused stream mode produces a concentrated flow well-suited to filling water bottles, jugs, or containers with narrow openings that catch splashing from a standard tap.
• Cleaning sink surfaces — The fan spray mode — as shown in the product image — directs a flat sheet of water horizontally across a surface, useful for rinsing down the sides of a sink or directing water at a specific area.

How to Install and Use It

Remove the existing aerator or end fitting from your tap’s outlet thread. Screw the faucet extender attachment’s universal connector onto the tap thread in its place. The swivel connector allows the spray head to be angled to the preferred position. Turn on the tap. Use the selector button on the top of the spray head to cycle between the three spray modes. To change the spray angle, rotate the swivel connector to point the head where needed.

Note: The attachment is specified as a universal connector. Compatibility with non-standard or proprietary tap threads should be confirmed before purchase.

Frequently Asked Questions

Q: Does this replace my whole tap or attach to the existing one?
A: It is an attachment that connects to the outlet of your existing tap. It does not replace the tap body, handle, or plumbing.

Q: What are the three spray modes?
A: As shown in the product image: a waterfall/rain mode (wide multi-jet flow), a fan/scraper spray mode (flat sheet of water for surface cleaning), and a focused stream mode (concentrated flow for filling containers). A selector button on the unit cycles between them.

Q: Does the spray head rotate?
A: Yes. The swivel ball connector between the tap thread and spray head allows the head to be angled and rotated to direct water in the preferred direction.

Q: Will it fit my tap?
A: The connector is specified as a universal fitting compatible with standard tap outlet threads, including kitchen, bathroom, bar, and laundry sink taps. Non-standard or proprietary tap threads may not be compatible.

Q: Is it compatible with hot water?
A: Yes. The operating temperature is specified up to 70°C, covering standard domestic hot water supplies.

Q: What pressure does it support?
A: Nominal operating pressure of 0.6 MPa — within standard domestic water supply pressure ranges.

Q: What colours are available?
A: Black and Silver. Select from the variant options above.

Q: What is it made from?
A: ABS plastic body with an electroplated chrome-finish surface treatment.

Three Spray Modes. One Swivel Attachment. No Plumbing.

ABS body with electroplated chrome finish. Rotating swivel connector. Three selectable spray modes: waterfall, fan spray, and focused stream. Universal tap thread connector. Hot and cold water compatible up to 70°C, 0.6 MPa. Black or Silver. Fits in minutes onto your existing tap. Select your finish above and add it to your cart.